FOSROC ADMIXTURES
Every concrete manufacturer needs to provide top quality concrete while achieving better consistency, productivity, innovation, and cost-effectiveness. Fosroc has developed a good range of technically superior solutions for the complete concrete trade – with solutions that cover each stage, from initial technical work during the final application.
Fosroc could be a leader in concrete admixtures, with custom formulations carefully designed for specific client use. Our famous Aura, Structure and Coloplast series deliver prime quality, exceptional performance and efficient solutions for concrete producers everywhere the planet.
Fosroc manufactures and supplies:
- Superplasticizers
- Plasticizers
- Accelerators
- Corrosion Inhibitors
- Viscosity Modifying Admixtures
- Integral Waterproofing Admixtures
- Curing compounds
- Stabilizers
- Specialty Admixtures
At the leading edge of concrete admixtures technology, our Aura and Structure series give the best performance below all conditions, giving the specified workability, slump retention and high permeability in soft concrete underneath all conditions, particularly harsh environments.
| Product | Description | Typical Uses | Dosage/Coverage/Yield |
|---|---|---|---|
| Water Reducing Admixtures (Plasticisers) | |||
| Conplast P211 1, 5, 20 and 200 litres | Water reducing admixtures. Conforms to IS:9103-99 & Complies with ASTMC494 as Type A & IS:2465. | All structural and general concrete where improved density and quality are required.Cement saving where excess cement proves necessary to obtain target strength. | 0.2 to 0.5 liter / 100 kg of total cementitious material |
| Conplast P505 5, 20 and 200 litres | High performance slump retaining and water reducing admixtures. Complies with BS 5075 part 1 and ASTMC494 as Type B and D & IS:9103-99. | Cement saving can be made without reduction in strength and workability. Used for all structural concrete where improved density and quality are required. | 0.4 to 1.0 liter / 100 kg of total cementitious material |
| Retarding Plasticisers | |||
| Conplast RP264 5, 20 and 200 litres | Retarding and water reducinng admixture. Conforms to IS9103-99. Also complies with ASTM C494 Type B and Type D. | Avoidance of cold joints where delays in transport and placing of concrete occur-towers, chimneys, hi-rise buildings, using slipform shutters, tunnels/ shaft lining, offshore construction and piles. | 0.2 to 0.6 liter / 100 kg of total cementitious material |
| Conplast R 20, 200 litre & bulk supply. | Retarding water reducing admixture. Conplast R complies with BS 5075 Part 1 and with ASTM C494 as Type B and Type D. | To extend the working life of semi-dry concrete screeds. Particularly suitable for use in mixes having fly ash and also improve the working life of semi dry concrete mixes, specifically RCC (Roller Compacted Concrete) type of mixes. | 0.25 to 0.6 liter per 100 kg of total cementitious material |
| Conplast SR 5,20 and 200 litres | Surface retarder for concrete. | Surface retarder for producing exposed aggregate concrete finish in face-down precast concete manufacture. | 8-12m2/ litres |
| High Range Water Reducing Admixtures (Superplasticiers) - SNF Based | |||
| Conplast SP337 250 kg 5, 20 and 200 litres. | High performing water reducing superplasticisers. Conforms to IS:9103-1999 also complies with superplasticisers. Conforms to ASTM C-494 Type F. | To produce pumpable concrete for low water cement ratio concrete. Easy compaction in heavily reinforced concrete bridges, foundations columns, beams and narrow formwork units. | 0.5 to 1.5 liter per 100 kg of total cementitious material |
| Conplast SP 430 5, 20, 200 litres. 200 & 250 Kg | High range superplasticising admixture. Complies with IS:9103:1999 and BS 5075 Part 3, it also conforms to ASTM C-494 Type F and Type G depending on the dosage used. | Speeds up construction, increases workability and cohesion, aids pumping by reducing line friction and dry packing, low porosity resulting in sustainability improved water penetrartion resistance. | 0.5 to 1.5 liter per 100 kg of total cementitious material |
| Conplast SP430ES2 200 liters 250 kg & bulk supply | High performance superplasticising admixture. Conplast SP430 ES2 complies with IS9103:1999, BS 5075 Part 3 and with ASTM C494 Type ‘G’ admixture depending on dosage used. | To provide increased ultimate strength gain by significantly reducing water demand in a concrete mix. To provide improved durability by increasing ultimate strength and reducing concrete permeability. | 0.6 - 1.5 litres per 100 kg of total cementitious material |
| Conplast SP 430SRV 200 litres & 250 kg | Slump retention admixture for structural concrete Conplast SP430SRV complies with the requirement of ASTM C 494-80 as a Type G & IS:9103-1999. | Conplast SP430SRV is used where a high degree of workability is required and also as an aid to workability retention where delays in transportation or placing are likely or when high ambient temperatures cause rapid slump loss. | 0.35 to 0.90 litres / 100kg - for normal mixes & 0.5 to 1 litre/100 kg for high cement content mixes. |
| Conplast SP 430G8 200 litres and 250 kg | High performance superplasticising admixture. Conplast SP430 G8 complies with IS:9103:1999 and BS:5075 Part 3. Conplast SP430 G8 conforms to ASTM-C-494 Type ‘G’. | To produce pumpable concrete to obtain high strength by substantial reduction in water resulting in low permeability and high early strength. | 0.5 - 1.5 litres / 100 kg+D7 of total cementitious material |
| Conpalst SP 430 KRM6 5, 20 and 200 litre bulk supply. | Conplast SP430KR(M)6 has been specially formulated to give high water reductions upto 25% without loss of workability or to produce high quality concrete of reduced permeability. | • To produce pumpable concrete • To produce high strength, high grade concrete M30 & above by substantial reduction in water resulting in low permeability and high early strength. • To produce high workability concrete requiring little or no vibration during placing. | 0.5 - 1.5 litres / 100 kg of total cementitious material |
| Conplast SP430 ITPQ 200 kg & bulk supply. | Superplasticising admixture for PQC concrete. Conplast SP430ITPQ complies with IS:9103:1999 and BS:5075 Part 3. Conplast SP430 conforms to ASTM-C-494 Type ‘G’ depending on the dosage used. | Best Suitable for PQC concrete by substantial reduction in water resulting in low permeability and high early strength. | 0.5 - 1.5 litres/ 100 kg of total cementitious material |
| Conplast SP 500KL 200, 250 kg & bulk supply | High performance water reducing and superplasticising admixture. Conplast SP500 KL complies with IS:9103:1999 (2007) and conforms to ASTM-C-494 Type ‘G’. | To produce pumpable concrete to obtain high strength by substantial reduction in water resulting in low permeability and high early strength. | 0.5 - 1.3 litres / 100 kg of total cementitious material |
| Conpalst SP550 250 Kg drums & bulk supply. | Conplast SP550 has been specially formulated to give higher water reductions without loss of workability or to produce high quality concrete of reduced permeability. | • To produce pumpable concrete • To produce high strength, high grade concrete by substantial reduction in water resulting in low permeability and high early strength. • To produce high workability concrete requiring little or no vibration during placing | 0.5 - 1.5 litres / 100 kg of total cementitious material |
| Conplast SP 600200, 250 kg & bulk supply | High range water reducing, superplasticising and slump retaining admixture. Conplast SP600 complies with IS:9103:1999 and BS:5075 Part 3. Conplast SP600 conforms to ASTM-C-494 Type ‘D’ and Type ‘G’ depending on the dosages used. | To produce pumpable concrete for low water cement ratio by substantial reduction in water resulting in low permeability and high early strength. | 0.5 - 1.3 litres / 100 kg of total cementitious material |
| Air Entraining Agents | |||
| Conplast PA21(S)200 litres | Water reducing & air entraining admixtures, conforms to IS:9103-1999 (2007). | Concrete water retaining structures-dams, canal linings and reservoirs and costal structures. | 0.2 - 0.4 litres/ 100 kg of total cementitious material |
| Conplast AEA20 and 200 litres & bulk supply. | Air entraining admixture. Conplast AEA complies with BS 5075 Part 2, BS 4887 Part 1, ASTM C260. | To produce air entrained concrete for increased durability and resistance to damage by frost and deicing salts. Typical applications include concrete roads and concrete dams, airport runways and taxiways and other extensive areas of concrete exposed to potential frost damage. | 0.08 litres / 100 kg of total cementitious material |
| High Range Water Reducing Admixtures (Hyper Plasticisers) - PCE Based | |||
| Auramix 200 200 kg drums and bulk supply. | High performance PCE based admixture for wide range of concrete grades. | Auramix 200 is a high performance retarding superplasticiser intended for applications where retardation and long workability retention are required. | 0.3 to 2 percent by weight of total cementitious material |
| Auramix 300 200, 250 kgs drums and bulk supply. | Advanced low viscosity retarding superplasticiser, based on polycarboxylic technology | Auramix 300 is a high performance retarding superplasticiser intended for applications where retardation and long workability retention are in : Mass raft foundation, Pumped concrete, Concrete requiring long workability retention, High performance concrete. | 0.5 to 3.0 liters/ 100 kg of total cementitious material |
| Auramix 350 200 kg drums and bulk supply. | High performance PCE based admixture for wide range of concrete grades. Auramix 350 complice to IS:9103 : 1999 as a water reducing admixture. | Auramix 350 is a high performance super plasticizer suitable for low and high grade concrete and intended for applicationswhere high water reduction and long workability retentions are required. | 0.3 to 1.5 percent by weight of total cementitious material |
| Auramix 400 200 Kg, 250 Kg and bulk supply. | Advanced low viscosity high performance superplasticiser, based on polycarboxylic technology. Auramix 400 complies with IS:9103-1999(2007). It also complies with ASTM C494 Type G. | Auramix 200 is a high performance retarding superplasticiser intended for applications where retardation and long workability retention are required. | 0.4 to 2 percent by weight of total cementitious material |
| Auramix 300 Plus200, 250 kgs drums and bulk supply. | Robust concrete admixture for long workability retention with good rheology. | Auramix 300 Plus is a high performance retarding superplasticiser intended for applications where retardation and long workability retention (4 hours and more). | 0.4 to 2 percent by weight of total cementitious material |
| Admixture for Precast Industries | |||
| Auracast 100 200Kg, 250 Kg and bulk supply. | Advanced low viscosity superplasticiser, based on polycarboxylic technology for concrete precast industries. | Advanced low viscositysuperplasticiser, based on polycarboxylic technology for concrete precast industries. | 0.5 to 3 percent by weight of total cementitious material |
| Auracast 270M 200 kg, 250 kg drums and bulk supply. | High performance low viscosity PCE based admixture for early strength with slump retention. Auracast 270M complice to IS:9103:1999 as a superplasticizer and ASTM C 494 Type F and G depending on dosage. | Auracast 270M is a high performance super plasticizer suitable for precast concrete industry to obtain high early strength and workability retention. | 0.5 to 1.5 percent by weight of total cementitious material |
| Auracast 405 200 kg, 250 kg drums and bulk supply. | High performance low viscosity PCE based admixture for SCC & early strength. Auracast 405 complice to IS:9103 : 1999 as a water reducing admixture. | Auracast 405 is a high performance super plasticizer suitable for precast concrete industry to obtain high early strength and workability retention. Suitable for Self Compacting concrete. | 0.5 to 1.5 percent by weight of total cementitious material |
| Accelerators and Corrosion Inhibitors | |||
| Conplast NC 5, 20, 200 litres & 200 kg | Chloride free accelerating adixture, complies with IS:9103-99, BS 5075 Part 1 and ASTM C494 Type C. | To acclerate the setting and early strength gain of portland cement concrete and mortar. Typical application includes precast concrete sections, concrete placed in cold weather condtions and concrete repairs etc. | 2 - 3 litres /100 kg of total cementitious material |
| Conplast CN 20 and 200 litres | Calcium nitrite based corrosion inhibiting admixture. | As a corrosion inhibiting admixture in reinforced concrete. | 7.5-22.5 litre m3 approximately 2-6% by weight of total cementitious material |
| Under Water Admixture | |||
| Conplast UW 200 litres | Under water concrete admixture | Designed to allow concrete to be placed under water. | 0.6 to 1% by weight of total cementitious material |
| Integral Waterproofing Compounds | |||
| Conplast WL 125 ml, 0.5, 1, 5,10, 20, 100 and 200 litres | Integral waterproofing liquid admixture for concete and mortar. Conforms to IS 2645-2003 & IS 9103-1999. | Increases the waterproofing properties of concrete and cement sand mortars for critical applications like roof slabs and screeds, basements, external plastering, bathroom floors, water tanks, sumps, drains etc. | 125 ml / bag of total cementitious material |
| Conplast Crystalline 30 kg bag | Integral waterproofing admixture based on crystalline formation to produce water tight concrete. | Conplast Crystalline is an integral waterproofing admixture to produce water tight concrete. The active chemical in Conplast Crystalline react with moisture available in concrete to produce non soluble crystal formation throughout the pores of capillary tracks thus making concrete permanently sealed against water penetration from any direction. Conplast Crystalline is developed to use in all types of concrete foundation below ground, water reservoir, tunnel concreting, retaining walls and subways, water tank and swimming pools & precast unit. | 1 to 2 % by weight of total cementitious material |
| Conplst WP90 Powder 1 and 25 Kg | Integral waterproofing powder additive for concrete and mortar Conforms to IS:2645-2003. | To reduce the permeability of concrete and cement mortar for use in basements, roofslabs, screeds and water tanks. | 1kg/bag of total cementitious material |
| Plastering Aid & Concrete Block Admixture | |||
| Cebex 112 100 ml, 1, 5, 20 and 200 litres | Mortar plasticiser and+B27 plastering aid. | To improve workability and trowelling properties of sand/cement mortar during application and to minimise shrinkage cracks. | 100ml/bag of total cementitious material |
| Conplst SD110 5, 20, and 200 litre | Cement saver for concrete blocks. | Conplast SD110 is used to reduce material cost by reduction in cement without loss of strength or by increasing strength without additional cement. To get high early strength to improve productivity. | 0.40 litres/100 Kg of total cementitious material |
| Sprayed Concrete Accelerators | |||
| Sprayset HBL/HBL(M) 250 kg and 280 kg | Non-caustic shotcrete admixture sprayset HBL meets the requirements of ACI 506-56 (recommended practice for shotcreting - concrete society specification for sprayed concrete). | Used to enable a high build of sprayed concrete, shotcrete and gunite. To provide set acceleration and reduce rebound loss. | 5.0 litres/100 kg of total cementitious material |
| Sprayset HBP 25kg Bags. | Powder shotcrete admixture. sprayset HBP meets the requirements of ACI 506-56 (recommended practice for shotcreting - concrete society specification for sprayed concrete). | Used to enable a high build of sprayed concrete, shotcrete and gunite. To provide set acceleration and reduce rebound loss. | 2 to 5 kg /100 kg of total cementitious material |
| Sprayset SL 250kg and 280kg. | Sprayed concrete admixture. | Used in spray concrete, shotcrete and gunite processes where rapid setting is required. | 1.0 to 5.0 litres/100 kg of total cementitious material |
