Fosroc Chemicals Hyderabad
| FOSROC ADHESIVES | |||
|---|---|---|---|
| Product | Description | Typical Uses | Dosage / Coverage / Yeld |
| Segmental Bonding Adhesive | |||
| Nitobond PC 6 kg | Thixotropic epoxy adhesive for precast segments. | Bonding precasts concrete segments to speed up construction and provide structural and water resistant joint eg. flovers, bridges, pipelines etc. | 1.63m 2 / pack @ 2mm thickness |
| Concrete Bonding Agents | |||
| Nitotile EP 0.5, 1 & 4 litres | Solvent free epoxy bonding agent for joining old and new concrete | For bonding new cementitious materials to existing cementitious surfaces. For use on horizontal surfaces and on vertical surfaces where mortar or concrete can be supported by formwork. Ideal for extensions and repairs structural concrete in industrial, residential andcommercial buildings | 2.6 m 2/litre |
| Nitobond AR 1, 5, 20 litre | Acrylic emulsion cement modifier and concrete bonding agent. | Recommended as a primer for the Fosroc cementitious repairs system for improving bonding in renders and mortars, repair of worn, damaged or spalled concrete. | 6-8 m 2/litre |
| Nitobond SBR 1, 5, 20 litres | Styrene butadine polymer bonding agent cum cement mortar & concrete modifir. | Used to modify the concrete for repairing destressed RC members andto modify mortars as waterproofing. | approximately 4- 5 m2/ litre depending on substrate porosity. |
| Nitobond SBR Latex 1, 5, 20 litre | Latex based mortar and screed modifier & bonding agent | For modifying and improving bonding of flor toppings, renderings and mortars; repair of worn, damaged and spalled concrete, repair of large cracks, polymer modifid flor screeds, waterproof plasters for masonary and slurries. | approximately 4- 5 m2/ liter depending on substrate porosity. |
| Tile Adhesive | |||
| Nitotile GPX 5 & 30kg | Single component, tropical grade, ceramic tile adhesive. | High quality adhesive for the permanent fiing up ceramic tiles both in internal and submerged conditions i.e swimming pools, toilets, kitchens, florings etc. | 3.8 kg/m 2 @ 2mm |
| Nitotile GTA thickness Part A 30kg powder Part B 7.5kg polymer | Polymer modifid granite and marble tile adhesive. | Permanent fining of granite and marble tiles. | Approx 0.8% for 5kgs @ 3 mm thickness |
| Nitotile MPA 30 kgs | Multipurpose tile adhesive for the external and tile on tile application | High quality adhesive for the permanent fiing of ceramics tiles over smooth surfaces such as existing tiles, ceramic tiles or glassand external facia applications. | 3.8kg/m 2 @ 2mm thickness |
| Tile Grout | |||
| Nitotile Grout 1 kg | Pigmented, cement based tile joint filer. | High qulaity joint filer for filing the tile joints. | 49 RM in a 3x5mm joint / kg |
| Nitotile EPW Grout 1 kg & 5 kgs | Hygienic, hard wearing stain free water miscible epoxy resin tile grout. | Provides a stain free, chemical resistant, hard wearing, tile joint for areas like bathrooms, fountains and swimming pools. Factories, workshops and ware houses pharma industry, hospitals and labs commercial & residential buildings. | Refer datasheet |
| FOSROC ADMIXTURES | |||
| Product | Description | Typical Uses | Dosage/Coverage/Yield |
| Water Reducing Admixtures (Plasticisers) | |||
| Conplast P211 1, 5, 20 and 200 litres | Water reducing admixtures. Conforms to IS:9103-99 & Complies with ASTMC494 as Type A & IS:2465. | All structural and general concrete where improved density and quality are required.Cement saving where excess cement proves necessary to obtain target strength. | 0.2 to 0.5 liter / 100 kg oftotal cementitious material |
| Conplast P505 5, 20 and 200 litres | High performance slump retaining and water reducing admixtures. Complies with BS 5075 part 1 and ASTMC494 as Type B and D & IS:9103-99. | Cement saving can be made without reduction in strength and workability. Used for all structural concrete where improved density and quality are required. | 0.4 to 1.0 liter / 100 kg of total cementitious material |
| Retarding Plasticisers | |||
| Conplast RP264 5, 20 and 200 litres | Retarding and water reducinng admixture. Conforms to IS9103-99. Also complies with ASTM C494 Type B and Type D. | Avoidance of cold joints where delays in transport and placing of concrete occur-towers, chimneys, hi-rise buildings, using slipform shutters, tunnels/ shaft lining, offshore construction and piles. | 0.2 to 0.6 liter / 100 kg of total cementitious material |
| Conplast R 20, 200 litre & bulk supply. | Retarding water reducing admixture. Conplast R complies with BS 5075 Part 1 and with ASTM C494 as Type B and Type D. | To extend the working life of semi-dry concrete screeds. Particularly suitable for use in mixes having fly ash and also improve the working life of semi dry concrete mixes, specifically RCC (Roller Compacted Concrete) type of mixes. | 0.25 to 0.6 liter per 100 kg oftotal cementitious material |
| Conplast SR 5,20 and 200 litres | Surface retarder for concrete. | Surface retarder for producing exposed aggregate concrete finish in face-down precast concete manufacture. | 8-12m2/ litres |
| High Range Water Reducing Admixtures (Superplasticiers) - SNF Based | |||
| Conplast SP337 250 kg 5, 20 and 200 litres. | High performing water reducing superplasticisers. Conforms to IS:9103-1999 also complies with superplasticisers. Conforms to ASTM C-494 Type F. | To produce pumpable concrete for low water cement ratio concrete. Easy compaction in heavily reinforced concrete bridges, foundations columns, beams and narrow formwork units. | 0.5 to 1.5 liter per 100 kgof total cementitious material |
| Conplast SP 430 5, 20, 200 litres. 200 & 250 Kg | High range superplasticising admixture. Complies with IS:9103:1999 and BS 5075 Part 3, it also conforms to ASTM C-494 Type F and Type G depending on the dosage used. | Speeds up construction, increases workability and cohesion, aids pumping by reducing line friction and dry packing, low porosity resulting in sustainability improved water penetrartion resistance. | 0.5 to 1.5 liter per 100 kg of total cementitious material |
| Conplast SP430ES2 200 liters 250 kg & bulk supply | High performance superplasticising admixture. Conplast SP430 ES2 complies with IS9103:1999, BS 5075 Part 3 and with ASTM C494 Type ‘G’ admixture depending on dosage used. | To provide increased ultimate strength gain by significantly reducing water demand in a concrete mix. To provide improved durability by increasing ultimate strength and reducing concrete permeability. | 0.6 - 1.5 litres per 100 kg of total cementitious material |
| Conplast SP 430SRV 200 litres & 250 kg | Slump retention admixture for structural concrete Conplast SP430SRV complies with the requirement of ASTM C 494-80 as a Type G & IS:9103-1999. | Conplast SP430SRV is used where a high degree of workability is required and also as an aid to workability retention where delays in transportation orplacing are likely or when high ambient temperatures cause rapid slump loss. | 0.35 to 0.90 litres / 100kg - for normal mixes & 0.5 to 1 litre/100 kg for high cement content mixes. |
| Conplast SP 430G8 200 litres and 250 kg | High performance superplasticising admixture. Conplast SP430 G8 complies with IS:9103:1999 and BS:5075 Part 3. Conplast SP430 G8 conforms to ASTM-C-494 Type ‘G’. | To produce pumpable concrete to obtain high strength by substantial reduction in water resulting in low permeability and high early strength. | 0.5 - 1.5 litres / 100 kg+D7 of total cementitious material |
| Conpalst SP 430 KRM6 5, 20 and 200 litre bulk supply. | Conplast SP430KR(M)6 has been specially formulated to give high water reductions upto 25% without loss of workability or to produce high quality concrete of reduced permeability. | • To produce pumpable concrete • To produce high strength, high grade concrete M30 & above by substantial reduction in water resulting in low permeability and high early strength. • To produce high workability concrete requiring little or no vibration during placing. | 0.5 - 1.5 litres / 100 kg of total cementitious material |
| Conplast SP430 ITPQ 200 kg & bulk supply. | Superplasticising admixture for PQC concrete. Conplast SP430ITPQ complies with IS:9103:1999 and BS:5075 Part 3. Conplast SP430 conforms to ASTM-C-494 Type ‘G’ depending on the dosage used. | Best Suitable for PQC concrete by substantial reduction in water resulting in low permeability and high early strength. | 0.5 - 1.5 litres/ 100 kg of total cementitious material |
| Conplast SP 500KL 200, 250 kg & bulksupply | High performance water reducing and superplasticising admixture. Conplast SP500 KL complies with IS:9103:1999 (2007) and conforms to ASTM-C-494 Type ‘G’. | To produce pumpable concrete to obtain high strength by substantial reduction in water resulting in low permeability and high early strength. | 0.5 - 1.3 litres / 100 kg of total cementitious material |
| Conpalst SP550 250 Kg drums & bulk supply. | Conplast SP550 has been specially formulated to give higher water reductions without loss of workability or to produce high quality concrete of reduced permeability. | • To produce pumpable concrete • To produce high strength, high grade concrete by substantial reduction in water resulting in low permeability and high early strength. • To produce high workability concrete requiring little or no vibration during placing | 0.5 - 1.5 litres / 100 kg of total cementitious material |
| Conplast SP 600200, 250 kg & bulk supply | High range water reducing, superplasticising and slump retaining admixture. Conplast SP600 complies with IS:9103:1999 and BS:5075 Part 3. Conplast SP600 conforms to ASTM-C-494 Type ‘D’ and Type ‘G’ depending on the dosages used. | To produce pumpable concrete for low water cement ratio by substantial reduction in water resulting in low permeability and high early strength. | 0.5 - 1.3 litres / 100 kg of total cementitious material |
| Air Entraining Agents | |||
| Conplast PA21(S)200 litres | Water reducing & air entraining admixtures, conforms to IS:9103-1999 (2007). | Concrete water retaining structures-dams, canal linings and reservoirs and costal structures. | 0.2 - 0.4 litres/ 100 kg of total cementitious material |
| Conplast AEA20 and 200 litres & bulk supply. | Air entraining admixture. Conplast AEA complies with BS 5075 Part 2, BS 4887 Part 1, ASTM C260. | To produce air entrained concrete for increased durability and resistance to damage by frost and deicing salts. Typical applications include concrete roads and concrete dams, airport runways and taxiways and other extensive areas of concrete exposed to potential frost damage. | 0.08 litres / 100 kg of total cementitious material |
| High Range Water Reducing Admixtures (Hyper Plasticisers) - PCE Based | |||
| Auramix 200 200 kg drums and bulk supply. | High performance PCE based admixture for wide range of concrete grades. | Auramix 200 is a high performance retarding superplasticiser intended for applications where retardation and long workability retention are required. | 0.3 to 2 percent by weight of total cementitious material |
| Auramix 300 200, 250 kgs drums and bulk supply. | Advanced low viscosity retarding superplasticiser, based on polycarboxylic technology | Auramix 300 is a high performance retarding superplasticiser intended for applications where retardation and long workability retention are in : Mass raft foundation, Pumped concrete, Concrete requiring long workability retention, High performance concrete. | 0.5 to 3.0 liters/ 100 kg of total cementitious material |
| Auramix 350 200 kg drums and bulk supply. | High performance PCE based admixture for wide range of concrete grades. Auramix 350 complice to IS:9103 : 1999 as a water reducing admixture. | Auramix 350 is a high performance super plasticizer suitable for low and high grade concrete and intended for applicationswhere high water reduction and long workability retentions are required. | 0.3 to 1.5 percent by weight of total cementitious material |
| Auramix 400 200 Kg, 250 Kg and bulk supply. | Advanced low viscosity high performance superplasticiser, based on polycarboxylic technology. Auramix 400 complies with IS:9103-1999(2007). It also complies with ASTM C494 Type G. | Auramix 200 is a high performance retarding superplasticiser intended for applications where retardation and long workability retention are required. | 0.4 to 2 percent by weight of total cementitious material |
| Auramix 300 Plus200, 250 kgs drums and bulk supply. | Robust concrete admixture for long workability retention with good rheology. | Auramix 300 Plus is a high performance retarding superplasticiser intended for applications where retardation and long workability retention (4 hours and more). | 0.4 to 2 percent by weight of total cementitious material |
| Admixture for Precast Industries | |||
| Auracast 100 200Kg, 250 Kg and bulk supply. | Advanced low viscosity superplasticiser, based on polycarboxylic technology for concrete precast industries. | Advanced low viscositysuperplasticiser, based on polycarboxylic technology for concrete precast industries. | 0.5 to 3 percent by weight of total cementitious material |
| Auracast 270M 200 kg, 250 kg drums and bulk supply. | High performance low viscosity PCE based admixture for early strength with slump retention. Auracast 270M complice to IS:9103:1999 as a superplasticizer and ASTM C 494 Type F and G depending on dosage. | Auracast 270M is a high performance super plasticizer suitable for precast concrete industry to obtain high early strength and workability retention. | 0.5 to 1.5 percent by weight of total cementitious material |
| Auracast 405 200 kg, 250 kg drums and bulk supply. | High performance low viscosity PCE based admixture for SCC & early strength. Auracast 405 complice to IS:9103 : 1999 as a water reducing admixture. | Auracast 405 is a high performance super plasticizer suitable for precast concrete industry to obtain high early strength and workability retention. Suitable for Self Compacting concrete. | 0.5 to 1.5 percent by weight of total cementitious material |
| Accelerators and Corrosion Inhibitors | |||
| Conplast NC 5, 20, 200 litres & 200 kg | Chloride free accelerating adixture, complies with IS:9103-99, BS 5075 Part 1 and ASTM C494 Type C. | To acclerate the setting and early strength gain of portland cement concrete and mortar. Typical application includes precast concrete sections, concrete placed in cold weather condtions and concrete repairs etc. | 2 - 3 litres /100 kg of total cementitious material |
| Conplast CN 20 and 200 litres | Calcium nitrite based corrosion inhibiting admixture. | As a corrosion inhibiting admixture in reinforced concrete. | 7.5-22.5 litre m3 approximately 2-6% by weight of total cementitious material |
| Under Water Admixture | |||
| Conplast UW 200 litres | Under water concrete admixture | Designed to allow concrete to be placed under water. | 0.6 to 1% by weight of total cementitious material |
| Integral Waterproofing Compounds | |||
| Conplast WL 125 ml, 0.5, 1, 5,10, 20, 100 and 200 litres | Integral waterproofing liquid admixture for concete and mortar. Conforms to IS 2645-2003 & IS 9103-1999. | Increases the waterproofing properties of concrete and cement sand mortars for critical applications like roof slabs and screeds, basements, external plastering, bathroom floors, water tanks, sumps, drains etc. | 125 ml / bag of total cementitious material |
| Conplast Crystalline 30 kg bag | Integral waterproofing admixture based on crystalline formation to produce water tight concrete. | Conplast Crystalline is an integral waterproofing admixture to produce water tight concrete. The active chemical in Conplast Crystalline react with moisture available in concrete to produce non soluble crystal formation throughout the pores of capillary tracks thus making concrete permanently sealed against water penetration from any direction. Conplast Crystalline is developed to use in all types of concrete foundation below ground, water reservoir, tunnel concreting, retaining walls and subways, water tank and swimming pools & precast unit. | 1 to 2 % by weight of total cementitious material |
| Conplst WP90 Powder 1 and 25 Kg | Integral waterproofing powder additive for concrete and mortar Conforms to IS:2645-2003. | To reduce the permeability of concrete and cement mortar for use in basements, roofslabs, screeds and water tanks. | 1kg/bag of total cementitious material |
| Plastering Aid & Concrete Block Admixture | |||
| Cebex 112 100 ml, 1, 5, 20 and 200 litres | Mortar plasticiser and+B27 plastering aid. | To improve workability and trowelling properties of sand/cement mortar during application and to minimise shrinkage cracks. | 100ml/bag of total cementitious material |
| Conplst SD110 5, 20, and 200 litre | Cement saver for concrete blocks. | Conplast SD110 is used to reduce material cost by reduction in cement without loss of strength or by increasing strength without additional cement. To get high early strength to improve productivity. | 0.40 litres/100 Kg of total cementitious material |
| Sprayed Concrete Accelerators | |||
| Sprayset HBL/HBL(M) 250 kg and 280 kg | Non-caustic shotcrete admixture sprayset HBL meets the requirements of ACI 506-56 (recommended practice for shotcreting - concrete society specification for sprayed concrete). | Used to enable a high build of sprayed concrete, shotcrete and gunite. To provide set acceleration and reduce rebound loss. | 5.0 litres/100 kg of totalcementitious material |
| Sprayset HBP 25kg Bags. | Powder shotcrete admixture. sprayset HBP meets the requirements of ACI 506-56 (recommended practice for shotcreting - concrete society specification for sprayed concrete). | Used to enable a high build of sprayed concrete, shotcrete and gunite. To provide set acceleration and reduce rebound loss. | 2 to 5 kg /100 kg of total cementitious material |
| Sprayset SL 250kg and 280kg. | Sprayed concrete admixture. | Used in spray concrete, shotcrete and gunite processes where rapid setting is required. | 1.0 to 5.0 litres/100 kg of total cementitious material |
| FOSROC CONCRETE REPAIRS | |||
| Product | Description | Typical Uses | Dosage/Coverage/Yield |
| Cementitious Putties & Plugging Compounds for Non-Structural Cracks & Pin Holes | |||
| Renderoc CS 1 kg pack | Single part, non shrink, cementitious, crack sealer for plaster, masonry and concrete. | For sealing cracks on plaster, masonry and concrete substrates. | 1Kg of mixed material covers 30 RM for a groove size of 6 mm X 6 mm |
| Renderoc CF1, 5 & 25 kgs pack | Crack filler. | For sealing cracks on plaster, masonry and concrete substrates. | 1Kg of mixed material covers 30 RM for a groovesize of 6 mm X 6 mm |
| Renderoc FC 20 kgs | Single component polymer modified cementitious pinhole filler | For application to minor imperfections in concrete and masonry surface upto 0-3 mm range. | 4m2 @3mm thickness for 20 kgs bag |
| Renderoc Plug 1 kg Stand Up Pouch & 5 kg HDPE bag | Rapid setting cement based waterleak plugging mortar. | For the rapid temporary patching and plugging of concrete segments, concrete and brick tunnel linings, sewage systems, below ground access chambers. | - |
| Cementitious Repair Mortars | |||
| Renderoc HB2 Powder 18 kgs Liquid 0.54 kg | Light weight structural gradn prepacked cement mortar. | Reinstatement of spalled concrete members like beams, slab, soffits etc. | 1.3 m2 at 10mm thickness per 18 kg bag |
| Renderoc S2 Powder 25 kgs Liquid 0.25 kg | Structural grade prepacked cement mortar. | Reinstatement of spalled concrete members like beams, columns, walls etc. | 1.3 m2 at 10mm thickness per 25.25 kg bag |
| Renderoc SP40 25 kgs bags | Single component, fibre reinforced shrinkage compensated, polymer modified structural grade repair mortar (M 45 grade). | Renderoc SP40 is suitable for wet spraying and hand application in a wide variety of repair applications, and is particularly well suited to vertical and overhead repairs. Typical applications would include, but not be limited to, repairs to irregular profiles. repairs to any structural concrete members. | Approximately 13.5 litres per 25 kgs bags |
| Renderoc HSXtra 25 kgs bags | Single component, fibre reinforced, high strength, shrinkage compensated, polymer modified structural grade repair mortar (M 80 grade). | Nitoflor Coving UT is a three component trowel applied covingmortar. Typical application areas include food and beverage production, dairy processing, pharmaceutical, heavyduty traffic and engineering process areas. | 13.4 litres per 25 kgs bags |
| Renderoc DS40 25 kgs bags | Single component, shrinkage compensated, strcutural grade, dry spray applied polymer modified, repair mortar for concrete (M 45 grade). | Renderoc DS40 is designed for large area repairs such as bridges, tunnels, retaining walls, dams, refurbishment of columns etc. | Approx. 12.5 litres / 25 kgs bags (approx. 80 bags/m³) |
| RenderocUW 25 kgs | Antiwashout, high strength, shrinkage compensated, free flow, cementitious micro concrete for under water concrete repairs (M50 grade). | For free flow or pumped material to repairdeteriorated under water or tidal zone concrete structures without significant washout of the cement paste, applications include quay pillers, bridge columns, concrete piling and dam. | 14.5 liters /25 Kg at W/P 0.22 |
| Concrete Floor & Pavement Repair Mortars | |||
| Superpatch 25 kgs | Cementitious repair system for concrete floors. | For patching and replacement of worn areas, filling of holes or depressions in concrete floor slabs in factories, godowns, commercial or domestic buildings. | 13 liters/25 kg |
| Patchroc 25 kgs | Shrinkage compensated, medium fast setting, cementitious repair mortar for industrial floors, pavement quality concrete (PQC) and airport aprons (M40 grade). | Rapid reinstatement of large areas of concrete pavements, roadways, factory floors & car parks. | 12.6 liters/25 kg |
| Renderoc RSXtra 15 kgs bags | Dual shrinkage compensated, rapid setting, repair concrete for pavement quality concrete (PQC) (M45 grade). | For the emergency reinstatement of damaged or deteriorated oncrete. For both internal and external use. | 7.5 liter / 15 kg bag |
| Renderoc RG(L) 25 kgs bags | Shrinkage compensated, free flow, general purpose, microconcrete for concrete repairs (M 35 grade). | Elements, particularly where access is restricted and where vibration of the placed material is difficult or impossible. Suitable for various structural strengthening measures such as filling honeycombs and cracks. | Approximately 13.5 litres per 25 kgs bag |
| Renderoc RG(S) 25 kgs bags | Shrinkage compensated, free flow, structural grade microconcrete for concrete repairs (M45 grade). | Concrete elements, particularly where access is restricted and where vibration of the placed material is difficult or impossible. Suitable for various structural strengthening measures such as encasement build-ups, etc. | Approximately 13.7 litres per 25 kgs bag |
| Renderoc RG 25 kgs | Shrinkage compensated, free flow, structural grade microconcrete for concrete repairs and strengthening (M 50 grade). | For repair to damaged reinforced concrete elements particularly where access is restricted and where vibration of the placed material is difficult or impossible. Suitable for various structural strengthening measures such as encasements build-ups etc. | 13 litres/25Kg @ W/P 0.16 |
| Renderoc RG(M) 25 kgs | Shrinkage compensated, free flow, high strength, microconcrete for repairs and strengthening (M 60 grade). | Renderoc RG(M) is used for repairs to damaged reinforced concrete elements, particularly where access is restricted and where vibration of the placed material is diffi cult or impossible. It is suitable for various structural strengthening measures such as encasement build-ups etc. | 12.5 liters /25 Kg at W/P 0.16 |
| Renderoc LAXtra 25 kgs bags | Dual shrinkage compensated, free flow, microconcrete for repairs and strengthening of concrete (M 60 grade). | Renderoc LAXtra is suitable for mass infill to structural repairs in all types of load bearing situation. Typical applications would include, but not be limited to, the following: Repairs to columns suffering from major loss of section soffit repairs where heavy load bearing is required. Repairs to restricted access areas, where use of hand applied mortars would prove impractical.Repairs requiring high fluidity e.g. heavily congested steel or repairs into re-entrant angles/concealed voids. Any repairs requiring significant levels of load bearing. | 12.25 ltrs per 25 kgs bags |
| Renderoc RGSPL 25 kgs bags | Shrinkage compensated, free flow, high strength microconcrete for repairs and strengthening of concrete (M 75 grade). | For repairs to damaged reinforced concrete elements,particularly where access is restricted and where vibration of the placed material is difficult or impossible. It is suitable for various structural strengthening measures such as encasement build-ups, jacketing etc. | Approximately 12.0 litres per 25 kgs bags |
| Epoxy/Polyester Resin Based Repair Mortars | |||
| Nitomortar S 10 litres | High strength, high performance epoxy resin based repair mortar (60 MPA). | Repair of concrete, masonry, etc, damaged due to chemical attack and for repairing areas subject to tensile loads. | 2 m2 at 5mm thickness / pack |
| Nitomortar 30 8 litres | Epoxy resin based repair mortar (40 MPA). | For lining ETP, STP and chemical tanks along with suitable protective coating and for repairing dams (pointing) spillways etc. where abrasion resistanceis required with high strength. | 2.67 m2 at 3mm thickness |
| Nitocote VF 1/2 and 1 litre packs | Three component, epoxy resin based putty for sealing cracks and blow holes on concrete floors and walls | For filling blow holes, making good slightly damaged concrete, eliminating minor irregularities on floors and walls prior to applying Nitoflor and Nitocote epoxy coatings. | 1m² at 1mm thick/litre |
| Nitomortar FC 4 litres | Two component, epoxy resin based fairing coat cum filler for surface reprofiling and sealing cracks & pin holes. | Filling pinholes prior to overcoating Nitocote or Nitoflor products. | 1 litre /m2 at 1mm thickness |
| Nitomortar PE 5 litres | Polyster resin based jointing and repair compound. | Repair to concrete bedding units to be used on the same day or where ultra high strength is required-building elements, concrete rises, floor joint damage, worn stairways, blowholes and erosion pockets in concrete faces, setting window door frames and bedding precast units. | Refer datasheet |
| ExpocreteEC(FormerlyNitocoteEC) 13.5 litres | High strength epoxy concrete. | The product is designed for horizontal applications. it is ideally suited for fast and permanent reinstatement of defective concrete surfaces in bridges, dams, foundations, slabs, joints in highways, concrete runways. | 13.5 litres pack aggregate (not supplied) has to be added at site |
| ExposealUW(FormerlyNitosealUW) 2.4 litres & 24 litres | Structural grade, epoxy resin based putty for sealing surface cracks and joints on concrete. | For filling of blow holes, sealing cracks for under water grouting, eliminating micro irregularities on concrete surface in damp and under water conditions. | 1 liter /m2@ 1mm thickness |
| Expocrete EUW 13.5 L (27.75 kgs) packing | High strength, under water, flexible epoxy concrete. | For the fast and permanent reinstatement of concrete, particularly where high strength, abrasion, impact and chemical resistance are required. The product is designed for under water applications. It is ideally suited for reinstatement of defective concrete surface in bridges, dams, foundations, slabs, joints in highways, concrete runways and for use as a bedding material. | 13.5 L (27.75 kgs) packing |
| Conbextra EUW 1.5 litre packs | Water insensitive, epoxy material. | For use in grouting gaps ranging from 0.25mm to 10mm as an epoxy injection material. As an under water epoxy fillerised grout in conjunction with quartz filler. As an under water epoxy repair mortar in conjunction with quartz filler. | Refer datasheet |
| NitowrapEP(GF) NitowrapEP(CF) 100m length / roll Width 0.5m,100mm. | Glass and carbon fibre fabric reinforced, high performance, high strength, composite fibre wrapping system for structural strengthening. | Used for strengthening coloumns, beams, slabs load bearing structures partucularly where improvement to shear strength and deformation characterstics are required. It is ideal for seismic retrofitting also typical applications include piers, coloumns, bridges, towers, pipes, chimneys, tunnels and other structures etc. | Contact Fosroc |
| NitowrapCFP100m length / roll Width: 25, 50, 80, 100mm in 1.2 &1.4mm thick. | High performance, high strength, corossion resistant pultruded carbon fibre plates /laminates for structural strengthening. | For increasing load carrying capacity of structural members particularly where increase in live load/ traffic loads is expected. | Contract Fosroc |
| Polyurethane Injection Grouts | |||
| Nitofill UR63 1 litre | Two part solvent-free, low viscosity polyurethane resin system. When mixed in the proportions supplied reacts to form a tough, slightly flexible resin. | For injection into cracks in concrete or masonry, either wet or dry to form an elastic sealing. When used in conjunction with Nitofill WS60 it provides an effective system for crack sealing in wet condition. | Refer datasheet |
| Nitofil lWS60 1 litre | Two part polyurethane cracks injection resin for stopping running water leakages. | For injection into cracks in concrete to temporarily stop the flow of moving water. When used in conjunction with Nitofill UR63 it provides an effective system for crack sealing in wet condition. | Refer datasheet |
| FOSROC GROUTS & ANCHORS | |||
| Product | Description | Typical Uses | Dosage/Coverage/Yield |
| Cementitious Grouts | |||
| Conbextra GP1 25 kgs | Non shrink cementitious grout. Complies to ASTM C 1107 Type A. | Static load applications like steel column foundation, pipe rack foundations and equipments with only static load. | 12.5 Ltrs / 25 kgs bag @ Flowable Consistency |
| Conbextra GP2 25 kgs | Plastic shrinkage compensated, high flow, high strength cementitoous grout. Complies to ASTM C 1107 Type A. | Machine foundation grout with both Static & dynamic loads, bridge bearings, precas constrcution etc. | 13.3 Ltrs / 25 kgs bag @ Flowable Consistency |
| Conbextra GP2 N 30 kgs | Plastic shrinkage compensated, high flow, high strength cementitious grout with low exothermic heat. Complies to ASTM C 1107 Type A. | Machine foundation grout with both Static & dynamic loads, bridge bearings, precast constrcution etc. | 15.8 Ltrs / 30 Kgs bag @ Flowable Consistency |
| Conbextra GP3 30 kgs | Dual shrinkage compensated, high strength, high flow cementiotus grout. Complies to ASTM C 1107 Type C. | Machine foundation grout with both static and dynamic loads, bridge bearings etc. | 15.5 Ltrs / 30 Kgs bag at Flowable Consistency |
| Conbextra TS 25 kgs | Plastic shrinkage compensated, high flow, high strength cementitious grout with low exothermic heat and suitable for grouting thickness up to 250 mm. Complies to ASTM C 1107 Type A. | Suitable for grouting sections with section thickness upto 250 mm. | 12 Ltrs / 25 kgs bag @ Flowable Consistency |
| Conbextra HF 25 kgs | Dual shrinkage compensated, ultra high flow, high strength cementitious grout. Complies to ASTM C 1107 Type C. | Machine foundation grout with both Static & dynamic loads, bridge bearings etc. | 13.25 Ltrs / 25 kgs bag @ Flowable Consistency |
| Conbextra AT 25 kgs | Plastic shrinkage compensated, high flow, high early & ultimate strength cementitious grout. Complies to ASTM C 1107 Type A. | Machine foundation, bridge bearings, precast constrcution etc. | 12.5 Ltrs / 25 kgs bag @ Flowable Consistency |
| Conbextra HES 15 kgs | Plastic shrinkage compensated, B50high flow, high early & ultimate strength cementitious grout. Complies to ASTM C 1107 Type A | Machine foundation grout, bridge bearings, precast constrcution where high early strength is the prime criteria. | 9 Ltrs / 15 Kgs Bag @ Flowable Consistency |
| Conbextra UHS 25 kgs | Plastic shrinkage compensated, high flow, high early & ultimate strength cementitious grout. Complies to ASTM C 1107 Type A. | Machine foundation grout, bridge bearings, precast constrcution etc. | 12 Ltrs / 25 Kgs Bag @ Flowable Consistency |
| Conbextra HR 25 kgs | Heat resistant cementitious grout. Complies to ASTM C 1107 Type A. | Machine foundations subjected to heat | 12 Ltrs / 25 Kgs Bag @ Flowable Consistency |
| Conbextra BB92 O 25 kgs | Sulphate resistant high early and ultimate strength onshore wind mill grout. Complies to ASTM C 1107 Type A. | On shore windmill grout. | 11.5 Ltrs / 25 Kgs Bag @ Flowable Consistency |
| Conbextra BB92 25 kgs | High early and ultimate strength wind mill grout. Complies to ASTM C 1107 Type A. | On shore wind mills. | 11.5 Ltrs / 25 Kgs Bag @ Flowable Consistency |
| Conbextra UW 25 kgs | Antiwashout, non shrink, high strength cementitious under water grout. Complies to ASTM C 1107 Type A. | Under water repairs. | 14.5 Ltrs / 25 Kgs Bag @Flowable Consistency14.5 Ltrs / 25 Kgs Bag @ Flowable Consistency |
| Epoxy Grouts | |||
| Conbextra EP10 1 Ltr | Low viscosity epoxy injection grout. | Structural crack repair. | Refer datasheet |
| Conbextra EP10(M) 1.5 Ltr | Moisture insensitive epoxy resin injection material. | Conbextra EP10(M) is a two part epoxy resin system for grouting gaps ranging from 0.25mm to 9mm. | Refer datasheet |
| Conbextra EP 75 14 Ltrs | High flow, high early & ultimate strength epoxy grout suitable for grouting thickness upto 75 mm. Complies to ASTM C 1181. | Machine base grouting of heavy duty compressors, rail plates in ballastless track. | Refer datasheet |
| Conbextra EP 300 14 Ltrs | Low exotherm epoxy grout. Suitabe for grouting thickness upto 300 mm. Complies to ASTM C 1181. | Machine base grouting of heavy duty compressors, rail plates in ballastless track with grouting section thickness upto 300 mm. | Refer datasheet |
| Conbextra EBG (M) 3 Ltrs | Epoxy resin bearing grout. Complies to ASTM C 1181. | Elastomeric Bearing Pads, bridge bearing plates. | Refer datasheet |
| Chemical Anchors | |||
| Lokfix 0.5 & 2.5 Ltrs | Polyester resin grout. Complies to BS 4551 BS 5080 & BS 2782. | For high strength corrosion resistant anchoring of bolts and bars from12-50mm diameter into concrete, rock, masonry or brickwork where high speed of installation and early application of load is required. | Refer datasheet |
| Cement Grout Additives | |||
| Cebex 100 225 g | Plasticised expanding grout admixture. Complies to BS: 8110 Part 1-1985, Section 8.9.4.6. | Cebex 100 is an admixture for cementitious grouts where a reduced water/cement ratio and positive expansions are required. Applications include bed grouting, duct grouting, non-shrink infilling and jointing. | Refer datasheet |
| Cebex 200 225 g | Plasticising and hydrogen free expansion grout admixture. Complies to BS : 5075. | Cebex 200 is an admixture for cement grouts where a reduced water / cement ratio and positive expansion are required. Applications include bed grouting, duct grouting, non-shrink infilling and jointing. | Refer datasheet |
| FOSROC GRINDING AIDS & PERFORMANCE ENHANCERS | |||
| Product | Description | Typical Uses | Dosage/Coverage/Yield |
| Cemax 327 | Grinding aid for performance enhancer. | For use as a grinding aid performance enhancer for the production of portland and other hydraulic cements. | 0.03 - 0.07% by weight, depending on type of clinker, type of mill and desired results |
| Cemax 322 | Grinding aid for performance enhancer | For use as a grinding aid performance enhancer for the production of portland and other hydraulic cements. | 0.03 - 0.07% by weight, depending on type of clinker, type of mill and desired results |
| Cemax 333 | Grinding aid for performance enhancer. | For use as a grinding aid performance enhancer for the production of portland and other hydraulic cements. | 0.03 - 0.07% by weight, depending on type of clinker, type of mill and desired results |
| Cemax 350CL | Grinding aid for coal grinding | Cemax 350CL series are an aqueous solution of high performance dispersing agent for use as a grinding aid for coal/ petcoke grinding | 0.03% - 0.10% by weight of coal/petcoke |
| Cemax 412 | Grinding aid for performance enhancer. | For use as a grinding aid performance enhancer for the production of portland and other hydraulic cements. | 0.03 - 0.07% by weight, depending on type of clinker, type of mill and desired results |
| Cemax 415 | Grinding aid for performance enhancer. | For use as a grinding aid performance enhancer for the production of portland and other hydraulic cements. | 0.03 - 0.07% by weight, depending on type of clinker, type of mill and desired results |
| Auracem 604 | High performance grinding aid and performance enhancer. | For use as a grinding aid and performance enhancer for the production of portland and limestone cements. | 0.03 - 0.07% by weight, depending on type of clinker, type of mill and desired results |
| FOSROC INDUSTRIAL FLOORING | |||
| Product | Description | Typical Uses | Dosage/Coverage/Yield |
| Floor Hardeners | |||
| NitoflorHardtop/ HardtopSTD 25 kgs | Non mettalic, dry shake on floor hardeners. | Ideally suited for all industrial and commercial floors subjected to the heavy abrasion / wear suitable for flooring applications in heavy engineering industry,warehouses & car parking. | Application rate kg/m2 Heavy Duty 7.0 Medium Duty 5.0 Light Duty 3.0 |
| NitoflorLithurin(M) 20 & 200litres | High performance, liquid floor hardener & densifier. | For surface hardening of new and old concrete to prevent dust generation and to reduce permeability.Typical areas of application include warehouses, factories, platforms on both new and existing concrete surface where epoxies are not desirable. | 10 - 12 m2 / litre |
| Underlays | |||
| Nitoflor TF 5000 12 litres | 3 - 6 mm colored epoxy resin screed with excellent chemical and abrasion resistance. | The system offers an extremely hardwearing and impact resistant floor. Suitable for applications in areas subjected to heavy impact and abrasion in heavy engineering industries, loading & unloading bays & car park ramps. | 2.4 m2/Pack @ 5 mm |
| Nitoflor EU5 15 litres | 1.5 mm - 5 mm thick self smoothing epoxy based underlay. | A self smoothing epoxy screed recommended as an underlay prior to application of epoxy/PU based floor toppings. | 7.5 m2/ Pack @ 2 mm thickness |
| Coatings | |||
| Nitoflor FC140 4.5 litres | Epoxy resin based solvented floor sealer with high chemical & abrasion resistance. | The recommended uses are in production assembly areas, dairies, soft drinks production and bottling plants, breweries,kitchens, showrooms, aircraft hangers, dust proof rooms etc. Also used as colored sealer coat for screeds like TF 5000. | 45 m2 / pack / coat @ 45 microns DFT Recommended in minimum two coats @ 90 Mic. DFT |
| Nitoflor FC145 4.5 litres | High build epoxy resin based solvented floor coating with high chemical &abrasion resistance. | The recommended uses are in production assembly areas, dairies, soft drinks production and bottling plants, breweries,kitchens, showrooms, aircraft hangers, dust proof rooms etc. Also used as colored sealer coat for screeds like TF5000. | 4 m2 / ltr @ 250 Microns WFT per coat recommended application two coats |
| Nitoflor FC150 4.5 litres | High build solvent free epoxy resin based floor coating. | Provides a high build, hardwearing, chemical and abrasion resistant floor finish | 5.0m2/litre @ 200 microns WFT recommended application 400 microns in two coats |
| Nitoflor FC400UH 4.5 litres | Highly chemical resistant, hybrid polyurethane based floor coating. | Product provides an extremly hard wearing & chemical resistant floors specifically suitable for cold storage with temprature of upto-5 deg cel, dairies, chemical processing units, botteling plants & waste water treatment plants. | 11.25m²/pack @ 400 microns DFT in two coats |
| Nitoflor EPW100 4 litres pack | Water based epoxy floor coating. | Ideal for industrial or commerical locations where a hard-wearing, hygienic, dust-free environment is important.Particularly useful when moisture content in concrete is more than 5%. | 20-22m2 /pack /per coat @ 180 microns WFT (100 microns DFT) |
| Nitoflor PUW100 4 litres pack | Water based polyurethane coating. | Ideal for industrial or commerical locations where a hard-wearing, hygienic, dust-free environment is important. Particularly useful when moisture content in concrete is more than 5%. | 10m2/litre/coat @ 100 microns WFT (45 Micron DFT) |
| Toppings | |||
| NitcoflorSLRange SL500 - 4.5 litres SL1000 - 6 litres SL2000 - 15 litres SL3000 - 15 litres SL4000 - 15 litres | 0.5 - 4 mm thickself smoothing seamless epoxy floor toppings. | Ideal for industrial floors where a hardwearing, hygienic, dust free environment is important, Useful for hospital clean rooms, electronic assembly plants, engineering & manufacturing industries. | Refer datasheet |
| NitoflorSL2050 12 litre pack | 2 -5 mm thick Flow applied, water miscible, damp - tolerant epoxy resin based floor topping. | To provide a smooth, dense, matt finish, easily cleaned surface resistant to oils and liquids.Suitable for floors in warehouses, garages, pharmaceutical industries and medical laboratories, food beverages industries, light industries and food processing areas. | 6 Sqm per pack at 2 mm thickness |
| Nitoflor SLConductive/ Dissipative Top coat - 15 litres Under coat - 2.4 litres | 2 mm thick Epoxy resin based static conductive/ dissipative seamless floor toppings. | For use in areas where a static conductive or a static dissipative floor is required as a measure to control static electricity.Useful for electronic components assembly areas, painting booths of automobile plants, explosive material booths of automobile plants, explosive material manufacturing units, operation theatres etc. | Conductive undercoat- 15.0 - 17.5 m2 /pack Dissipative undercoat - 16.0 - 19.0 m2 / pack Conductive/ Dissipative Topcoat 7.5 m2 /pack @ 2 mm thickness |
| NitoflorEPU2000 15 litres | 2 mm thick epoxy polyurethane based floor topping. | Ideal for industrial floors where a hardwearing, hygienic, dust free environment is important, useful for hospital clean rooms, electronic assembly plants etc. | 7.5 m2 /Pack @ 2 mm thickness |
| Nitoflor TF120UB 12 litres | 5-12 mm thick heavy duty polyurethane floor screed. | With high chemical & abrasion resistant and also Thermal shock resistent (at higher thickness). | 2.4 m2/Pack @ 5 mm |
| Nitoflor SL6000UB 15 litres | 2-6 mm thick self smoothing polyurethane floor topping. | Ideal for industrial floors where a hardwearing, hygienic, dust free environment is important. Specifically suitable for food processing industry. | 2.5 sqm @ 6 mm thickness |
| Trafficguard UR100 Multi coat - Refer datasheet | Skid resistant, waterproof flexible protection system for car park decks. | Trafficguard UR100 is a modified polyurethane based traffic deck system designed to provide an added level of protection to, new and existing, heavily trafficked areas such as car park decks, car park ramps, turning areas, entrance/exit areas & thoroughfares. | Refer datasheet |
| TrafficguardUR150 Multi coat - Refer datasheet | Multilayer, hardwearing, anti skid car park deck coating. | Specifically recommended for Intermediate decks of Multilevel car parks and also for basement car parks | Refer datasheet |
| Nitoflor SL3000UT 20.25 kgs | 4 - 6 mm thick PU cementitious self smoothing topping. | Product offers an extremly hardwearing floor with excellent adhesion to concrete substrates specifically suitable for industrial floors in food & beverage, engineering, dairies & pharma. | 2.5 Sqm @ 4 mm thickness |
| Nitoflor RT6000UT 38.25 kgs packs | Resin rich, trowel applied heavy duty polyurethane floor screed. | Fosroc Nitoflor RT6000 UT is a heavy duty, trowel applied polyurethane floor screed designed with the highest order of durability to resist impact, abrasion, chemical attack and thermal shock. Its lightly textured finish makes the product ideal for both wet and dry processing environments. | 2.7 m²/pack at 6 mm 1.8 m²/pack at 9 mm |
| Nitoflor SL2000UB 15 Litres | Heavy duty polyurethane based flow applied. | Offers high resistance against impact, thermal shock, abrasion and chemicals. Resistance to several organic chemicals used in the food industry makes the system suitable for use in various food processing industries. | 7.5 m2/pack @ 2mm thickness |
| Nitoflor CovingUT 18 kg packs | Trowel applied polyurethane coving mortar | Nitoflor Coving UT is a three component trowel applied coving mortar. Typical application areas include food and beverage production, dairy processing, pharmaceutical, heavy duty traffic and engineering process areas. | 1.8 - 2.0 kg/m2/mm thickness |
| Nitoflor HB200UT 4.7 kg pack | Water-based high-build polyurethane coating | Fosroc Nitoflor HB200 UT is a three-part polyurethane coating designed as a sealer for Fosroc Nitoflor Coving UT mortar. | 6 m2 per 4.75 kg pack percoat (WFT per coat ~200 microns |
| Polyurea FLMPart A Iso component : 200 ltr drum Part B AMINE component : 200 ltr drum | Fast setting, pure polyurea elastomeric floor coating | Protective coating for flooring applications in a wide range of environmental conditions. Typical applications include: industrial floors, processing plants, food processing areas, workshops & production facilities, manufacturing plants & plant rooms | 1.5 – 3.0 ltrs per m2 @ 2mm thickness |
| Cemtop 250T 20 kgs bags | 3-6 mm thick self levelling cementitious floor levelling compound | Underlay for soft flooring applications like carpet, vinyl, linolium and also for wooden floorings | 4.0 m2 /20 Kg bag @ 3 mm thickness |
| Nitoflor ETSlurry 11 Litres | Heavy duty, flow applied, lightweight anti-skid surface dressing. | Nitoflor ET Slurry system provides a lightweight, yet extremely hardwearing anti-skid surface to a variety of substrates including steel, concrete and timber. | Refer datasheet |
| FOSROC JOINT SEALANTS | |||
| Product | Description | TypicalUses | Dosage / Coverage / Yield |
| Civil Engineering Sealants | |||
| Thioflex 600 GG Thioflex 600 PG 2.5 litres | Two part polysulphide sealant. | It is particularly recommended for sealing structural expansion joints in most civil engineering structures like building superstructures, subways, basements, flors and reserviors. | Refer datasheet. Dependent on joint size |
| Nitoseal MS600 Black - 3 liters Grey - 3 litres | One part, civil engineering sealant for immersed conditions. | Nitoseal MS600 is suitable for sealing movement joints in buildings and civil engineering structures including joints that will be subject to intermittenor permanent immersion. | Refer datasheet |
| Building Sealants | |||
| Decofi 310ml cartridges | Fast setting flexible acrylic sealant. | #NAME? | Refer datasheet |
| Nitoseal PU40 600ml sachet | One part, PU based building & expansion joint sealant. | Nitoseal PU40 is suitable for sealing joints in concrete, brickwork, blockwork, precast panels, stone cladding, perimeter sealing around doors and windows, and non traffied flor joints. | Refer datasheet |
| Nitoseal PU 280 4.0 litres | Heavy duty epoxy urethane joint sealant | For sealing internal flor joints subject to heavy industrial use in factories warehouses etc. Particularly suitable for sawcut joints for long strip floring and other non moving joints. | Refer datasheet |
| Pavement Sealants | |||
| Colpor 200/200PF Black - 3 litres Grey - 3 litres | Cold applied, high performance, fuel resistant, pitch and pitchfree polyurethane sealant. | For sealing joints in concrete joints in concrete roads, concrete runways. Also suitable for sealing concrete joints where fuel and oil spillage might occur like runways, oil terminals, parkings and cargo areas. | |
| Polyethylene Filler Board & Backup Cord | |||
| Expancell Available in different sizes | Closed cell polyethylene joint sealant backup cord. | Expancell is a closed cell polyethylene foam supplied in circular cord lengths for use as a back up material for joint sealing applications. Expancell is available in a variety of sizes ranging from 6mm to 50mm in diameter suitable for the most commonly encountered joint dimensions. | Refer datasheet |
| Hydrocell XL 900 x 1800 mm sheets | Closed cell, non-absorbent, polyethylene joint filer. | Hydrocell XL semi-rigid, cellular polyethylene joint f ller usedfor forming expansion joints in concrete, brickwork and blockwork. The product provides excellent support to sealants subject to hydrostatic pressure and is particularly recommended for waterretaining or water excluding structures. | Refer datasheet |
| Expansion Joint Membrane | |||
| Expoband One 25m x 100mm x 1mm Roll 25m x 200mm x 1mm Roll 15m x 100mm x 2mm Roll 15m x 200mm x 2mm Roll | Flexible expansion joint membrane. | Expoband One is a hypalon membrane system which is designed to be bonded over movement joints or cracks in structures to prevent the passage of water. It is bonded in position using Nitomortar FCFS two-part epoxy adhesive.Exponand One is suitable for construction use and in repair/ remedial applications. | Refer datasheet |
| FOSROC PROTECTIVE COATINGS | |||
| Product | Description | Typical Uses | Dosage/Coverage/Yield |
| Anti-Corrosive Coatings | |||
| Nitozinc Primer 1 & 5 litre Pack | Two component, epoxy-zincrich corrosion protection primer for reinforcement and fabrication steel. | Nitozinc Primer is recommended for priming exposed steel reinforcement for use with Fosroc concrete repair mortars. The product actively resists corrosion within the confines of the repair location and avoids the generation of incipient anodes in immediately adjacent locations. | 4 -5 m2/litre |
| Nitocote AP35 1, 5 and 20 litres | Latex acrylic polymer based cementitious coating for corrosion protection of rebars prior to concreting. | Provides passivating protection matrix to reinforcing steel. | Approximately 8 - 10 m2/ litre depending on substrate |
| Anti-Carbonation Coatings for Concrete | |||
| Dekguard Standard 5, 20 litres | Aliphatic acrylate based protective and decorative exterior coating system for concrete and masonry for bridges, industrial structures and buildings. | Recommended as a protective and decorative coating for atmospherically exposed RC structures from long term protection. It is ideally suited for soffit of bridge decks, RC frames in highrise buildings and similar expensive infrastructures. Can be used both in repair and new construction situations. | 8 m2/litre/coat |
| Dekguard S 5, 20 litres | High performance, pure aliphatic acrylate based protective and decorative exterior antocarbonation coating system for concrete and masonry for bridges, industrial structures and buildings. | Recommended as a protective and decorativem coating for atmospherically exposed RC structures from long term protection. It is ideally suited for soffit of bridge decks, RC frames in highrise buildings and similar expensive infrastructures. Can be used both in reparied and new construction situations. | 5 -6 m2/litre/coat |
| Dekguard S300 5, 10 & 20 litres packs | High performance, high build,aliphatic acrylate based protective and decorative exterior coating system for concrete and masonry surfaces of bridges, industrial structures and buildings | An ideal protective cum decorative coating for bridges, flyovers, underpasses, commercial and industrial building. | Refer datasheet |
| Dekguard WB 300 4 and 20 litres packs | High performance, high build, elastomeric, protective cum decorative exterior anticarbonation coating system for concrete and masonry surfaces of bridges and buildings conforming to IRC SP 80: 2000 perfomance specifications | Dekguard WB300 is designed to protect atmospherically exposed reinforced concrete structures above any splash zones from attack by chloride ions, oxygen and moisture ingress, especially where there is a danger of subsequent cracks appearing within the substrate | Dekguard WB300: 2.2m2/litre @ 300 micron DFT |
| Dekguard E2000 20 litre drum | High performance, highly elastomeric and crack bridging, water based, acrylic, anticarbonation protective and decorative exterior coating system for concrete surfaces of bridges and industrial structures | Dekguard E2000 is designed to protect atmospherically exposed, reinforced concrete structures (above any splash zones) from attack by chloride ions, oxygen and moisture ingress, especially where there is a danger of subsequent cracks appearing within the substrate. Typical uses include, but are not necessarily limited to, the following : • New and existing structures • Concrete storage tanks - external surfaces • Bridge structures | 1.6 to 2.5 m2/litre/coat |
| Chemical & Abrasion Coatings | |||
| NitocoteEP140 4.5 litres packs | Two component, chemical and abrasion resistant, epoxy resin based, internal protective coating for steel and concrete surfaces | A hygenic and chemical resistant coating for steel tanks, concrete walls, concrete and metal coloumns, sluices and ducts. | 10 m2/litre @ 100 microns WFT |
| NitocoteEP140(M) 4 litres packs | Two component, epoxy resin and micaceous iron oxide based internal and external protective coating for steel and concrete surfaces | A chemical and UV light resistant coating for steel tanks, concrete walls, bridges, concrete and metal columns, sluices and ducts | 10 m2 / litre/coat @ 100 microns WFT |
| NitocoteEN901 4 litre pack | High chemical resistant protective coating. | Suitable in waste water treatment plants, desalination plants, food processing plants, pulp and paper mills, power plants chemical manufacturing plants, fertilizer plants and petroleum refineries | 2.0m2/litre @500 microns WFT per coat |
| NitocoteEPW100 4 litres packs | Water based epoxy coating and sealer | Suitable for applications to reservoirs, tanks, ducts, silos, water tretment works, breweries, dairies, kitchens and food processing plants | 20-22m2/pack/coat @ 180 microns WFT (100 microns DFT) |
| NitocoteEP410 4 litres packs | Epoxy resin tank and surface lining material | Provide protection against corrosion and aggresive agents. Suitable for internal coatings of concrete and steel structural elements. | 16m2 @ 250 micros thickness WFT per pack |
| Exterior Weather Proof Coating Systems for Buildings | |||
| NitocoteWallGuardWhite base: 20, 4 &1 litres Dark base : 19, 3.8 & 0.95 litres Midtone base : 19, 3.8 & 0.95 litres | Elastomeric & decorative acrylic waterproofing coating for exterior walls | Nitocote Wall Guard is a acrylic cementitious, elastomeric coating with inherent crackbridging ability. Provides a high quality effective waterproofing cum decorative coating for exterior wall. Prevents dampness of external wall subjected to severe weather in coastal environment | 3 to 3.5 sqmt / litres in two coats |
| Food Grade Protective Coatings | |||
| NitocoteEP405 4 litres packs | Solvent free, food grade, epoxy resin coating or potable water retaining structures | Suitable for potable water tanks, interior coating for large dia pipelines conveying potable water in food and breverage industries | 10m2/litre/coat @ 100 microns |
| Waste Water Treatment Protective Coatings | |||
| NitocoteET550 18 litres packs | Epoxy-coal tar, amine adduct based, high build, coating | Suitable for tanks above ground or in totally submerged conditions such as pipelines. Particularly useful in sewage works, effluent tretament plants, dock and harbour installations | 1.8-1.9 m2/litre @ 350 microns DFT |
| NitocoteET140 4 litres packs | Low build epoxy-coal tar based protective coating. | Suitable for tanks above ground or in totally submerged conditions such as pipelines. Particularly useful in sewage works, effluent tretament plants, dock and harbour installations | 40 m2/4 litre pack @ 100 microns WFT |
| NitocoteET402 10 litres packs | Solvent free, high build, epoxycoal tar based protective coating for steel and concrete. | Provides protective coating for sea water tanks, intake channels, manhole drain & sewerage & effluent plants, jetty piles & docks. | 5.0m2/litre @ 200 microns WFT (per coat) |
| NitocoteUR512 4 litres packs | Two component, solvent based, aliphatic polyurethane, chemical and weather resistant. | Protective coating for steel & concrete surfaces | 10 m2/litre/coat @ 100 microns/WFT |
| NitocotePUW100 4 litres packs | Water dispersed, low VOC, ecofriendly, antifungal and weather resistant, polyurethane based internal and external protective coating cum sealer for concrete and masonry surfaces for food and pharma industries. | Nitocote PUW100 provides a pigmented sealing coat on to cementitious and concrete surfaces providing dustproof, easily cleanable and resistant to penetration of oils and liquids. The cured film is resistant to corrosion, chemicals and abrasion. Suitable for application in breweries, dairies, kitchens and food processing plants. The cured film forms a waterproof barrier and is non-toxic. | 10m2/litre/coat @ 100 microns WFT (45 microns DFT) |
| Nitocote PE 135 4 & 20 litres packs | Eco friendly, protective coating based on hydrophobic polyster resin. | Suitable as both protective coating, waterproof & curing compound. Ideal for protection to all concrete structures. | 2.5m2 per litre @ 400 microns WFT /coat |
| Dekguard PU 4 litres | Two component aliphatic polyurethane exterior protective coating for concrete and steel structures | Dekguard PU provides an easily cleaned chemical and UV resistant protective coating, and suitable for external waterproofing also. | 10 sq.m /ltr/coat at 30 - 40 microns DFT |
| Nitocote SN522 1, 5 and 20 litres | Ready to use colourless silicone water repellent | To provide a water repellent with improved self cleaning properties on exteriors of buildings, brick work, concrete, cement rendering, natural or cast stone. | 4.5 - 9m2/litre 10 m2/ |
| NitocoteSN525 25 & 200 litres+A35 | Monomeric silane water repellent penetrant. | A deep penetrating treatment designed to protect concrete from both water and chloride ingress whilst still permitting water vapour transmission (breatheability). | 175 - 350ml / m2 |
| Heat Resistance Protective Coatings | |||
| NitocoteHR260 5 and 20 litres packs | Heat resistant silicone acrylic protective coating system for industrial structures. | Used in wide range of industrial environments like oil refineries, chemical plants, power stations etc. Where temperature resistance is required upto 260 degree celcius. | 10 m2/litre/coat @ 40 microns/DFT |
| NitocoteHT120 4 litres packs | Solvent free, novel resin protective coating system for steel and concrete. | For high temperature service conditions upto 120 degree celcius. It is particularly used to resist boiling water under continuous or partial service conditions. | 5.0m2/litre @ 200 microns WFT per coat |
| CECRI Technology Protective Coatings | |||
| NitocoteEM300 4 litres packs | High performance moisture compatible corrosion resistant internal protective coating system for concrete and steel surfaces of NDCT and IDCT cooling towers - CECRI-CSIR technology. | Fosroc Nitocote EM 300 protective coating system has been exclusively developed by CECRI - CSIR, karikudi for protection of the internal concrete surface of the cooling towers - IDCT and NDCT of thermal power plants as per the performance requirements. The other areas of applications includes the Internal surface protection of water treatment plants, STPs, & ETPs and substructure of transportation bridges | 4to 4.5 m2 / litre/coat @ 225 to 250 microns WFT |
| NitocoteBCS300 Multicoat system | Epoxy-polyurethane based multi- Refer datasheet coat exterior chemical, corrosion and weather resistant protective coating system for concrete surfaces of bridges and industrial structures - CECRI-CSIR technology. | This is a chemical and UV ray resistant high build multicoat protective coating system for bridge decks, RCC girders and other atmospherically exposed RCC structures. | Refer datasheet |
| FOSROC SURFACE TREATMENTS | |||
| Product | Description | Typical Uses | Dosage/Coverage/Yield |
| Concure WB 5, 20 and 200 litre | Low viscosity wax emulsion, water based concrete curing compound. Complies to ASTM C 309-90. | For spraying on freshly cast concrete, or newly exposed concrete surfaces after removal of form work, to form a temporary membrane which will retain sufficient moisture for effective curing to take place. | 3-5 m2/litre |
| Concure LP90 20 and 200 litre | High efficiency polymeric resin based film forming curing agent. Concure LP90 give 90% or greater curing efficiency when tested as per BS 7542-1992. | As a spray applied membrane to retain moisture In concrete for effective curing. Suitable for all general concrete applications and of partcular benefit for large area concrete surfaces, such as airport runways, roads and bridge works. | 3-5 m2/litre |
| Concure 1315 5, 20 and 200 litre | Eco-friendly, acrylic resin based, clear curing compound, sealer and dust proofer.Complies to ASTM C1315 Type 1, class A | Provides a clear curing, sealing and dustproofi ng compound, which can be used in a wide range of applications: • High rise construction to eliminate water curing • Floors, warehouses, slabs and columns • Self-curing, primer system to subsequent coverings | 5-7 m2/litre |
| Reebol 5, 20 and 200 litre | Chemical mould release agent. | To provide quick,clean and easy stripping of moulds and formwork and ensure high quality fair faced and stain free concrete. | Reebol 20-60m2 litre* depending on porocity & texture of mould surface. |
| Reebol Emulsion Xtra 5, 20 and 200 litre | Concentrated and emulsified chemical mould release agent. | For easy stainfree removal of concrete moulds and formwork of all types, particularly where wooden formwork is used and demoulding and stripping times exceed 24 hrs. | 1 litre of Reebol emulsion Xtra when diluted with 6 litres of water will cover 80-180M2 depending upon the nature of the substrate. |
| Multipurpose Cleaning Agent & Rust Removers | |||
| Reebaklens 0.5, 1.5 and 20 litre | Hardened concrete remover, cleaning and etching agent. Also used as tile cleaning agent. | Removes hardened concrete from tools, machinery and equipment, suitable for etching of concrete floors and surfaces prior to application of resin or other surface coating. Also used as tile cleaning agent. | Refer datasheet |
| Reebaklens RR 0.5, 1 and 5 litre | Rust remover, cleaning and etching agent | Reebaklens RR is used as a rust remover from steel bars prior to encasing in concrete / microconcrete. It can also be used on ohter steel surfaces prior to coating with epoxy systems. | Approx. 2.0 - 2.5 m2/L |
| FOSROC WATER PROOFING | |||
| Product | Description | Typical Users | Dosage / Coverage / Yield |
| Brushbond 23 kg Powder + 4 Lit Polymer 6 kg Powder + 1 Lit Polymer | Two component acrylic modified cementitious coating for concreteand masonry surface. | Provides seamless, flxible, waterproof coating suitable for use in water tanks, sunken slabs, sumps, roofs, basements to ensure water tightness. | Industrial pack: (23 kg Powder + 4 Lit Polymer) 16-18m2 @1 mm thickness. |
| Brushbond RFX 6.71 & 20.088 kgs | Elastomeric polymer modifid cemtentitious waterproof coating. | Used for waterproofig of existing and new structure. Also suitable for all types of structures including those situated in coastal environmentRoof, basements, watertanks etc. | Industrial pack (15kg powder + 4.8 litres Liquid) 12-14 m2 in two coats to achieve 1mm thickness. |
| Nitocoat CM210 18 kgs + 5 kgs = 23 kgs | Elastomeric cementitious coating with inherent crack-bridging ability | Nitocote CM210 provides a cementitious, elastomeric coating typical applications include: Potable water retaining structures & excluding structures. Internal basement waterproofig. Drainage culverts, bathrooms, shower rooms. Foundations in contact with ground water under saline conditions. | Coverage1 (at nominal 1 mm thickness) Roller, trowel application: 10.8-11.7 m2 per 23 kg Spray application: 9.0-11.7 m2 per 23 kgs. |
| Brushbond Roofguard 4 & 20 litre | High build fire reinforced acrylic waterproofig coating for roofs. | Can be applied directly on existing concrete, brickbat coba, and screed concrete even without removal provided the substrates are sound enough for application of the coating avoiding the risk of damage to the old roof associated while removing of the existing overlays. The product provides a seamless, tough durable water resistant coating which can withstand light pedestrian traff and also has excellent weather resistance for exterior applications. | 0.5 liter / m 2 / coat |
| Brushcrete 5, 10, 20 and 50 litres | Acrylic Polymer for concrete & masonry | Brushcrete polymer in conjunction with cement provides a seamless waterproof coating to concrete and masonry surfaces. | Refer datasheet |
| Hydroproof Xtra 0.5, 1, 5 & 20 litres | Single component polymer for cement based waterproofing. | Hydroproof Xtra polymer in conjunction with cement provides a seamless waterproof coating to concrete and masonry surfaces. | 4.5 to 5.0 m 2 / L / coat |
| Crystalline Waterproofig System | |||
| Brushbond TGP 15Kg bags | Crystalline capillary waterproofing system for cementitious substrates. | For waterproofig against the positive or negative sides of hydrostatic heads of water, for damproofig, repairing cracks, plugging holes, sealing wall- flor joints and stopping active leaks. | 1.0 to 2.0 kg/m 2 per application (brush) |
| Bituminous Waterproof Coating | |||
| Nitoproof 100/120 100 - (5, 20, 50 & 200 litres) 120 - (3.75, 15 & 73 litres) | Bituminious waterproofig coating | External coating for below ground structuressuch as cellars waterproofig, protection of concrete against ground water ingress. | Nitoproof 100-4-6 m 2/litre Nitoproof 120-2.8-3.5 m 2/litre/coat |
| Pitch Modifid PU Waterproof Coating | |||
| Nitoproof 600 Standard 19 litres | Liquid applied single component elastomeric waterproofingmembrane. | For a wide range of waterproofig applications such as suspended flors, car decks, roof terraces, balconies, precincts, inspection pits, water retaining structures (not potable water), Sewage works and inverted roofs. | 0.76 m 2/litre @1.3 mm |
| Solar Reflctive & Thermal Insulating Coating | |||
| Brushbond TI Flexicoat 4 & 20 litres | Elastomeric acrylic polymer based solar reflective and insulating coating. | For use as a thermal insulation coating on roof slabs and walls of building. It can also be used on the interior walls and the roof of freezer rooms and cold storage facilities. | 2.5-3.0 m 2/2coat/litre |
| Sheet Membranes | |||
| Proofex Torchseal 3PI 10 m long x 1m wide roll | 3 mm plain fiish torch applied waterproofig membranes. | To provide waterproofig and damp-proof membranes for concrete roof and flor slabs. Shallow Basement & car parking decks | 8.90 m 2/ Roll Inclusive of overlapping |
| Proofex Torchseal 3SI 10 m long x 1m wide roll | 3 mm slated fiish torch applied waterproofing membranes. | To provide waterproofing and damp-proof membranes for concrete roof and flor slabs, shallow basement & car parking decks. | 8.90 m 2/ Roll Inclusive of overlapping |
| Proofex Torchseal 4PI 10 m long x 1m wide rol | 4 mm plain fiish torch applied waterproofig membranes | To provide waterproofing and damp-proof membranes for concrete roof and flor slabs, shallow basement tankings & car park deck slabs. | 8.90 m 2/ Roll Inclusive of overlapping |
| Proofex Torchseal 4SI 10 m long x 1m wide rol | 4 mm slated fiish torch applied waterproofing membranes. | To provide waterproofing and damp-proof membranes for concrete roof and flor slabs, shallow basement tankings & car park deck slabs. | 8.90 m 2/ Roll Inclusive of overlapping |
| Proofex Torchseal Antiroot Plain 10 m long x 1m wide roll | 4 mm antiroot plain fiish with torch applied waterproofing membranes. | To provide waterproofing on roof and podium with landscape | 8.90 m 2/ Roll Inclusive of overlapping |
| Proofex Torchseal Antiroot Slated 10 m long x 1m wide roll | 4mm Antiroot Slated fiish with torch applied waterproofing membranes. | To provide waterproof ng and damp-proof membranes for: concrete roof and foor slabs, basement tankings, car park deck slabs, concrete retaining structures, green roof / podium. | 8.90 m 2/ Roll Inclusive of overlapping |
| Proofex Torchseal 4PDRI 10 m long x 1m wide roll | Double reinforced torch applied waterproofing membranes | To provide waterproofing of bridge deck slab and subways. | 8.90 m 2/ Roll Inclusive of overlapping |
| Proofex Self Adhesive Geotext 15 m long x 1m wide rol | 2mm thick Geo-Fabric topped (250 microns Geo-Fabric Film) cold applied bituminous waterproofing membrane. | Continuously bonded waterproof membrane for below ground waterproofing building and civil engineering structures. | 13.4 m 2/ Roll with 100 mm overlapping |
| Proofex Self Adhesive PR15 15 m long x 1m wide roll | 1.5 mm PE topped ployster reinforced cold applied bituminous waterproofing membrane. | It is used as a cold applied waterproofing / damp proofing membrane in horizontal and vertical applications for protection of varioussubstrates like concrete, masonry, Gl, aluminium, wood etc. in wide range of uses: Can be laid on any type Gl. Aluminium and Can be laid on any type Gl. Aluminium and asbestos corrugated sheets due to stick on application. Medium to large roof slabs (domestic, commercial and industrial). Basements and raft slabs. Roof gardens where resistance to root is required. External application for cut & cover tunnels. | 13.4 m 2/ Roll with 100 mm overlapping |
| Proofex Self Adhesive PR 20 15 m long x 1m wide roll | 2 mm PE topped ployster reinforced cold applied bituminous waterproofing membrane. | It is used as a cold applied waterproofing / damp proofing membrane in horizontal and vertical applications for protection of various substrates like concrete, masonry, Gl, aluminium, wood etc. in wide range of uses:Can be laid on any type Gl. Aluminium and asbestos corrugated sheets due to stick on application. Medium to large roof slabs (domestic, commercial and industrial). Basements and raft slabs. Roof Gardens where resistance to root is required. External application for cut & cover tunnels. | 13.4 m 2/ Roll with 100 mm overlapping |
| Proofex Self Adhesive antiroot 15 m long x 1m wide roll | 2 mm polyster reinforced with antiroot cold applied bituminous waterproofing membrane. | To provide a continuously bonded waterproof membrane for below ground and land scape waterproofing in building and civil engineering structures. Can be laid on any type Gl. Aluminium and asbestos corrugated sheets due to stick on application. Medium to large roof slabs (domestic, commercial and industrial).Basements and raft slabs. Roof gardens where resistance to root is required. External application for cut & cover tunnels. | 13.4 m 2/ Roll with 100 mm |
| Proofex PGP 25 m long x 2.1 m wide roll | Loose laid PVC waterproofing membrane | Provides a continuously loose laid waterproof membrane system for building and civil engineering structures and is particularly suited to below ground construction. Basement, tunnel, reservoirs, lakes and canal waterproofing. | Refer datasheet |
| Proofex ORG Proofex OGP Proofex OFB 25m x2.1m roll | Loose laid synthetic TPO waterproofing membrane | Provides a continuously loose laid waterproof membrane system for building and civil engineering structures:Podiums, parking decks, flt roofs and garden roofs waterproofing. Basement waterproofing.Lining of ponds, canals, reservoirs and landfills. | Refer datasheet |
| Proofex Engage 1.27 x 30 m | Pre-applied waterproofing membrane conforming to the requirements of BS EN 13967:2004 and BS 8102:2009. Proofex Engage mechanically bonds to poured concrete, remaining in place if settlement of substrate occurs | Critical & deep basements, durable, simple application, inert product, resistant to chemicals and aggressive ground salts. | 38.10m2 |
| Proofex Sheetdrain 80: 2 m x 20 m roll 100 2.44m x 12.5m roll | Geocomposite HDPE drainage and protection membrane | Proofex Sheetdrain is an HDPE cuspated drainage sheet, available in 2 sizes: 8mm for depths up to 6m and 10mm for depths up to 20m. It is f xed to walls and roofs of structures to provide a f ltered, drainage plane that will route ground water and gases away from the structure, utilising subsoil drains to link with the site drainage system. Proofex Sheetdrain reduces water pressure on structures and the possibility of water ingress and can be effctively used in conjunction with other waterproofing systems. | Refer datasheet |
| Proofex Cavitydrain 80: 2 m x 20 m roll 100 2.44m x 12.5m roll | High density polyethylene drained cavity former for waterpoofing of sub-structures. | Proofex Cavitydrain is used where sub-structures are constructed in concrete designed to minimise water entry in accordance with BS 8102:2009 - Protection of structures against water from the ground -Type C. Any water ingress through the structural concrete will not enter the internal environment because Proofex Cavitydrain provides a continuous water and damp proof drainage former to connect with and damp proof drainage former to connect with drainage channels or outlets cast into flor slabs. Water leakage problems which show up in the construction stage can be remedied before the drainage layer is put in place, adding to the security of the waterproofing system. | Refer datasheet |
| Polyurea Spray Applied Waterproofig | |||
| Fosroc Polyurea WPE Drums : 400 litre | Fast setting, pure polyurea elastomeric waterproof coating | Anti-corrosion, waterproof and protective coating for concrete and steel in a wide range of environmental conditions. | Refer datasheet |
| Fosroc Polyurea WCS Boxes of 6 x 600 m | Fast setting, pure polyurea elastomeric waterproof coating. | Standard grade offers an anti-corrosion, waterproof and protective coating for small areas and repairs of polyurea coatings, on concrete and steel surfaces. Gun Grade offrs an excellent seam seal for the Fosroc Proofex Engage waterproofing system. | Refer datasheet |
| PVC Waterstops | |||
| Supercast PVC | Centrally and externally placed PVC waterstops swellable waterstops. | The Supercast range of PVC waterstop is designed to provide an integral sealing system for movement and construction joints in concrete cast in-situ. These joints typically occur in the following types of structure:Water retaining : Reservoirs, water towers and sewage tanks, dams, culverts, canals and spillways, swimming pools, bunded areas surrounding liquid retaining tanks. | Refer datashee |
| Swellable Waterstops | |||
| Supercast SW 10 15m rol | Swellable waterstop for in-situ concrete. | Typical uses include secant piled and diaphragm walled basements, pile caps and casting against old concrete. For all construction joints subjected to water pressure. | Refer datasheet |
| Supercast SW 20 5m roll | Swellable waterstops for in-situ concrete. | Typical uses include secant piled and diaphragm walled basements, pile caps and casting against old concrete. For all construction joints subjected to water pressure. | Refer datasheet |
| Supercast SW30 5 m rolls | High swell hydrophillic waterstop for in-situ concrete. | Typical uses include secant piled and diaphragm walled basements, pile caps and casting against old concrete. Also for structures in saline environment. For all construction joints subjected to water pressure. | Refer datasheet |
| Supercast SW Adhesive 380 ml cartridge | Swellable waterstops for in-situ concrete. | Fixing of swellable waterstops. | Refer datasheet |
| Injection Hose System | |||
| Supercast Predimax Injection Hose 100m rolls | Injection hose for protection against potential and active leaks in construction and cold joints in concrete. | Supercast predimax injection system has been designed to prevent passage of water through concrete joints construction and cold joints, water excluding structures, e.g. subways and tunnels, water retaining structures, e.g. canals and reservoirs, sewage treatment plants, below ground concrete construction, e.g. around pile heads & basements. | Refer datasheet |
