FOSROC GROUTS & ANCHORS

Fosroc’s cement and concrete grouts systematically exceed business standards. no matter the structure you’re fixing place, we have the product to grant it the ultimate connection and foundation for long run durability.

Our Conbextra grout vary has been leading the marketplace for decades once it involves dependable exactness grouting, thanks to its exceptional flow, stability, and strength. It’s robust enough for serious duty comes like the grouting of turbine bases, and may offer superior quality grouting for prime preciseness applications, like the full encapsulation of post-tensioned cables.

Fosroc Lokfix rosin anchors square measure industry-leading adhesive systems for the structural fixing of reinforcement and rib rod. they’ll tolerate dry, damp and wet conditions and square measure appropriate for fixing into hollow masonry and cracked concrete. commissioned to the best standards, they’ll be employed in unstable square measures and are able to accommodate a number of the best masses within the market.

Our robust, site-ready formulations deliver cost-efficient, consistent, and technically superior solutions, regardless of the scale of your project.

ProductDescriptionTypical UsesDosage/Coverage/Yield
Cementitious Grouts
Conbextra GP1
25 kgs
Non shrink cementitious grout. Complies to ASTM C 1107 Type A.Static load applications like steel column foundation, pipe rack foundations and equipments with only static load.12.5 Ltrs / 25 kgs bag @ Flowable Consistency
Conbextra GP2
25 kgs
Plastic shrinkage compensated, high flow, high strength cementitoous grout. Complies to
ASTM C 1107 Type A.
Machine foundation grout with both Static & dynamic loads, bridge bearings, precas constrcution etc.13.3 Ltrs / 25 kgs bag @ Flowable Consistency
Conbextra GP2 N
30 kgs
Plastic shrinkage compensated, high flow, high strength cementitious grout with low exothermic heat. Complies to ASTM C 1107 Type A.Machine foundation grout with both Static & dynamic loads, bridge bearings, precast constrcution etc.15.8 Ltrs / 30 Kgs bag @ Flowable Consistency
Conbextra GP3
30 kgs
Dual shrinkage compensated, high strength, high flow cementiotus grout. Complies to ASTM C 1107
Type C.
Machine foundation grout with both static and dynamic loads, bridge bearings etc.15.5 Ltrs / 30 Kgs bag at Flowable
Consistency
Conbextra TS
25 kgs
Plastic shrinkage compensated, high flow, high strength cementitious grout with low exothermic heat and suitable for grouting thickness up to 250 mm. Complies to ASTM C 1107 Type A.Suitable for grouting sections with section thickness upto 250 mm.12 Ltrs / 25 kgs bag @ Flowable Consistency
Conbextra HF
25 kgs
Dual shrinkage compensated, ultra high flow, high strength cementitious grout. Complies to
ASTM C 1107 Type C.
Machine foundation grout with both Static & dynamic loads, bridge bearings etc.13.25 Ltrs / 25 kgs bag @ Flowable Consistency
Conbextra AT
25 kgs
Plastic shrinkage compensated, high flow, high early & ultimate strength cementitious grout.
Complies to ASTM C 1107 Type A.
Machine foundation, bridge bearings, precast constrcution etc.12.5 Ltrs / 25 kgs bag @ Flowable
Consistency
Conbextra HES
15 kgs
Plastic shrinkage compensated, B50high flow, high early & ultimate strength cementitious grout. Complies to ASTM C 1107 Type AMachine foundation grout, bridge bearings, precast constrcution where high early strength is the prime criteria.9 Ltrs / 15 Kgs Bag @ Flowable Consistency
Conbextra UHS
25 kgs
Plastic shrinkage compensated, high flow, high early & ultimate strength cementitious grout.
Complies to ASTM C 1107 Type A.
Machine foundation grout, bridge bearings, precast constrcution etc.12 Ltrs / 25 Kgs Bag @ Flowable Consistency
Conbextra HR
25 kgs
Heat resistant cementitious grout. Complies to ASTM C 1107 Type A.Machine foundations subjected to heat12 Ltrs / 25 Kgs Bag @ Flowable Consistency
Conbextra BB92 O
25 kgs
Sulphate resistant high early and ultimate strength onshore wind mill grout. Complies to ASTM C 1107 Type A.On shore windmill grout.11.5 Ltrs / 25 Kgs Bag @ Flowable Consistency
Conbextra BB92
25 kgs
High early and ultimate strength wind mill grout. Complies to ASTM C 1107 Type A.On shore wind mills.11.5 Ltrs / 25 Kgs Bag @ Flowable Consistency
Conbextra UW
25 kgs
Antiwashout, non shrink, high strength cementitious under water grout. Complies to ASTM C 1107 Type A.Under water repairs.14.5 Ltrs / 25 Kgs Bag @Flowable Consistency14.5 Ltrs / 25 Kgs Bag @
Flowable Consistency
Epoxy Grouts
Conbextra EP10
1 Ltr
Low viscosity epoxy injection grout.Structural crack repair.Refer datasheet
Conbextra EP10(M)
1.5 Ltr
Moisture insensitive epoxy resin injection material.Conbextra EP10(M) is a two part epoxy resin system for grouting gaps ranging from 0.25mm to 9mm.Refer datasheet
Conbextra EP 75
14 Ltrs
High flow, high early & ultimate strength epoxy grout suitable for grouting thickness upto 75 mm.
Complies to ASTM C 1181.
Machine base grouting of heavy duty compressors, rail plates in ballastless track.Refer datasheet
Conbextra EP 300
14 Ltrs
Low exotherm epoxy grout. Suitabe for grouting thickness upto 300 mm. Complies to ASTM C 1181.Machine base grouting of heavy duty compressors, rail plates in ballastless track with grouting section thickness upto 300 mm.Refer datasheet
Conbextra EBG (M)
3 Ltrs
Epoxy resin bearing grout. Complies to ASTM C 1181.Elastomeric Bearing Pads, bridge bearing plates.Refer datasheet
Chemical Anchors
Lokfix
0.5 & 2.5 Ltrs
Polyester resin grout. Complies to BS 4551
BS 5080 & BS 2782.
For high strength corrosion resistant anchoring of bolts and bars from12-50mm diameter into concrete, rock, masonry or brickwork where high speed of installation and early application of load is required.Refer datasheet
Cement Grout Additives
Cebex 100
225 g
Plasticised expanding grout admixture. Complies
to BS: 8110 Part 1-1985, Section 8.9.4.6.
Cebex 100 is an admixture for cementitious
grouts where a reduced water/cement ratio and
positive expansions are required. Applications
include bed grouting, duct grouting, non-shrink
infilling and jointing.
Refer datasheet
Cebex 200
225 g
Plasticising and hydrogen free expansion grout
admixture. Complies to BS : 5075.
Cebex 200 is an admixture for cement grouts
where a reduced water / cement ratio and
positive expansion are required. Applications
include bed grouting, duct grouting, non-shrink
infilling and jointing.
Refer datasheet